Windowsƽ̨Ï ±àÒë - ÖÆÔìɽկ±Ò for Windows

admin

¡¾É½Õ¯±Ò²úÉú¡¿linux/windows±àÒ루C++/QT£©
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
¡¾Debian 64bit GUI¡¿

make
gcc
g++
build-essential
cmake
libboost-dev
libboost-test-dev

apt-get install libqtgui4
nas libqt4-dev

°²×°zlib£º¡¾Èç¹ûÒѾ­ÓÐÁË£¬²»ÓÃÔÙ°²×°¡¿
http://www.zlib.net/
http://sourceforge.net/projects/libpng/files/zlib/
cd /tmp
wget http://nchc.dl.sourceforge.net/p ... b/1.2.7/zlib127.zip
unzip zlib127.zip
cd zlib-1.2.7
CFLAGS="-O3 -fPIC" ./configure --prefix=/usr/local/zlib --enable-shared
make
make test
make install

°²×°zlibc¡¢zlib1g-dev£º
apt-get install zlibc zlib1g-dev

°²×°curl£º
http://curl.haxx.se/download.html
apt-get install libcurl3 libcurl3-dev
ldconfig


apt-get install libncurses5-dev

apt-get install git

±àÒë²Î¿¼
cd ~/ ; git clone https://github.com/pocopoco/yacoin.git ; cd ~/yacoin/src ; make -j4 -f makefile.unix USE_UPNP=- ; mv yacoind ~/ ; rm -Rf ~/yacoin ; mkdir ~/.yacoin ; cd ~/

¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
¡¾Fedora 64bit GUI¡¿

make
gcc
gcc-c++ÒÀÀµÓÚlibstdc++-devel  libstdc++
yum groupinstall "Development Tools"
yum install kernel-devel kernel-headers

cmake


yum install qt4
nas qt4-devel

ºöÂÔ£º
http://qt-project.org/
http://qt-project.org/downloads
http://sw.nokia.com/id/14b2039c- ... t_SDK_Lin64_offline
cd /tmp
wget http://sw.nokia.com/id/14b2039c- ... t_SDK_Lin64_offline
# »òÕߣº
wget http://nds2.fds-forum.nokia.com/ ... x-x86_64-v1.2.1.run


°²×°zlib£º¡¾Èç¹ûÒѾ­ÓÐÁË£¬²»ÓÃÔÙ°²×°¡¿
http://www.zlib.net/
http://sourceforge.net/projects/libpng/files/zlib/

yum install zlib zlib-devel
»òÕߣº
cd /tmp
wget http://nchc.dl.sourceforge.net/p ... b/1.2.7/zlib127.zip
unzip zlib127.zip
cd zlib-1.2.7
CFLAGS="-O3 -fPIC" ./configure --prefix=/usr/local/zlib --enable-shared
make
make test
make install

°²×°zlibc¡¢zlib1g-dev£º
yum install zlibc zlib1g-devÎÞÈí¼þ°ü

°²×°curl£º
http://curl.haxx.se/download.html
yum install libcurl-devel libcurl
ldconfig


yum install ncurses-devel ncurses

yum install git

±àÒë²Î¿¼
cd ~/ ; git clone https://github.com/pocopoco/yacoin.git ; cd ~/yacoin/src ; make -j4 -f makefile.unix USE_UPNP=- ; mv yacoind ~/ ; rm -Rf ~/yacoin ; mkdir ~/.yacoin ; cd ~/
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
Linux²¹³ä£º

apt-get install libssl-devδ·¢ÏÖ
apt-get install libsslδ·¢ÏÖ
yum install openssl-devel

apt-get install apt-file
apt-file update
apt-file search db_cxx.h
apt-get install libdb4.8++-dev

apt-get install libqt4-dev qt4-dev-tools

Ubuntu precise has packages for libdb5.1-dev and libdb5.1++-dev
apt-get install libdb5.1-dev libdb5.1++-devδÕÒµ½
apt-get install libdb4.8-dev
apt-get install libdb4.8++-dev
yum install libdb

apt-get install libboost-all-dev
apt-get install libboost1.37
apt-get install libboost1.37-dev
yum install boost

apt-get install miniupnpc
apt-get install libminiupnpc
apt-get install libminiupnpc-dev
yum install miniupnpc

apt-get install libstdc++
http://qt-project.org/downloadsÏÂÔØ°²×°QT
°²×°Ê±±¨´í/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found
˵Ã÷ÔÚµ±Ç°µÄGCC°æ±¾ÖУ¬Ã»ÓÐGLIBCXX_3.4.15,ÐèÒªÏÂÔظü¸ßµÄ°æ±¾£»
Ìæ»»libstdc++.so.6£»ÏÂÔØlibstdc++6_4.7.1-2_i386.deb
http://ftp.acc.umu.se/mirror/cdi ... ool/main/g/gcc-4.7/
http://ftp.acc.umu.se/mirror/cdi ... 6_4.7.2-4_amd64.deb
dpkg -i libstdc++6_4.7.2-4_amd64.deb
ar -x libstdc++6_4.7.2-4_amd64.deb && tar xvf data.tar.gz
cd usr/lib/x86_64-linux-gnu
cp libstdc++.so.6.0.17 /usr/lib/
cd /usr/lib/ && rm libstdc++.so.6
ln -s libstdc++.so.6.17 libstdc++.so.6
ldconfig

http://ftp.de.debian.org/debian/ ... +6_4.7.1-2_i386.deb
½âѹ£º ar -x libstdc++6_4.7.1-2_i386.deb && tar xvf data.tar.gz
cp libstdc++.so.6.0.17 /usr/lib/
cd /usr/lib/ && rm libstdc++.so.6
ln -s libstdc++.so.6.17 libstdc++.so.6
ldconfig
ÖØа²×°QT



±ÈÌرұàÒëÌõ¼þ
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
windows
doc\build-msw.txt

Copyright (c) 2009-2012 Bitcoin Developers
Distributed under the MIT/X11 software license, see the accompanying
file COPYING or http://www.opensource.org/licenses/mit-license.php.
This product includes software developed by the OpenSSL Project for use in
the OpenSSL Toolkit (http://www.openssl.org/).  This product includes
cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP
software written by Thomas Bernard.


See readme-qt.rst for instructions on building Bitcoin-Qt, the
graphical user interface.

WINDOWS BUILD NOTES
===================

Compilers Supported
-------------------
TODO: What works?
Note: releases are cross-compiled using mingw running on Linux.


Dependencies
------------
Libraries you need to download separately and build:

                default path               download
OpenSSL         \openssl-1.0.1c-mgw        http://www.openssl.org/source/
Berkeley DB     \db-4.8.30.NC-mgw          http://www.oracle.com/technology ... keley-db/index.html
Boost           \boost-1.50.0-mgw          http://www.boost.org/users/download/
miniupnpc       \miniupnpc-1.6-mgw         http://miniupnp.tuxfamily.org/files/

Their licenses:
OpenSSL        Old BSD license with the problematic advertising requirement
Berkeley DB    New BSD license with additional requirement that linked software must be free open source
Boost          MIT-like license
miniupnpc      New (3-clause) BSD license

Versions used in this release:
OpenSSL      1.0.1c
Berkeley DB  4.8.30.NC
Boost        1.50.0
miniupnpc    1.6


OpenSSL
-------
MSYS shell:
un-tar sources with MSYS 'tar xfz' to avoid issue with symlinks (OpenSSL ticket 2377)
change 'MAKE' env. variable from 'C:\MinGW32\bin\mingw32-make.exe' to '/c/MinGW32/bin/mingw32-make.exe'

cd /c/openssl-1.0.1c-mgw
./config
make

Berkeley DB
-----------
MSYS shell:
cd /c/db-4.8.30.NC-mgw/build_unix
sh ../dist/configure --enable-mingw --enable-cxx
make

Boost
-----
DOS prompt:
downloaded boost jam 3.1.18
cd \boost-1.50.0-mgw
bjam toolset=gcc --build-type=complete stage

MiniUPnPc
---------
UPnP support is optional, make with USE_UPNP= to disable it.

MSYS shell:
cd /c/miniupnpc-1.6-mgw
make -f Makefile.mingw
mkdir miniupnpc
cp *.h miniupnpc/

Bitcoin
-------
DOS prompt:
cd \bitcoin\src
mingw32-make -f makefile.mingw
strip bitcoind.exe


¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
unix
doc/build-unix.txt

Copyright (c) 2009-2012 Bitcoin Developers
Distributed under the MIT/X11 software license, see the accompanying
file COPYING or http://www.opensource.org/licenses/mit-license.php.
This product includes software developed by the OpenSSL Project for use in
the OpenSSL Toolkit (http://www.openssl.org/).  This product includes
cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP
software written by Thomas Bernard.


UNIX BUILD NOTES
================

To Build
--------

cd src/
make -f makefile.unix            # Headless bitcoin

See readme-qt.rst for instructions on building Bitcoin-Qt,
the graphical user interface.

Dependencies
------------

Library     Purpose           Description
-------     -------           -----------
libssl      SSL Support       Secure communications
libdb4.8    Berkeley DB       Blockchain & wallet storage
libboost    Boost             C++ Library
miniupnpc   UPnP Support      Optional firewall-jumping support

miniupnpc may be used for UPnP port mapping.  It can be downloaded from
http://miniupnp.tuxfamily.org/files/.  UPnP support is compiled in and
turned off by default.  Set USE_UPNP to a different value to control this:
USE_UPNP=-    No UPnP support - miniupnp not required
USE_UPNP=0    (the default) UPnP support turned off by default at runtime
USE_UPNP=1    UPnP support turned on by default at runtime

IPv6 support may be disabled by setting:
USE_IPV6=0    Disable IPv6 support

Licenses of statically linked libraries:
Berkeley DB   New BSD license with additional requirement that linked
               software must be free open source
Boost         MIT-like license
miniupnpc     New (3-clause) BSD license

Versions used in this release:
GCC           4.3.3
OpenSSL       1.0.1c
Berkeley DB   4.8.30.NC
Boost         1.37
miniupnpc     1.6

Dependency Build Instructions: Ubuntu & Debian
----------------------------------------------
Build requirements:
sudo apt-get install build-essential
sudo apt-get install libssl-dev

for Ubuntu 12.04:
sudo apt-get install libboost-all-dev

db4.8 packages are available at:
https://launchpad.net/~bitcoin/+archive/bitcoin

Ubuntu precise has packages for libdb5.1-dev and libdb5.1++-dev,
but using these will break binary wallet compatibility, and is not recommended.

for other Ubuntu & Debian:
sudo apt-get install libdb4.8-dev
sudo apt-get install libdb4.8++-dev
sudo apt-get install libboost1.37-dev
(If using Boost 1.37, append -mt to the boost libraries in the makefile)

Optional:
sudo apt-get install libminiupnpc-dev (see USE_UPNP compile flag)


Dependency Build Instructions: Gentoo
-------------------------------------

Note: If you just want to install bitcoind on Gentoo, you can add the Bitcoin
      overlay and use your package manager:
          layman -a bitcoin && emerge bitcoind

emerge -av1 --noreplace boost glib openssl sys-libs/db:4.8

Take the following steps to build (no UPnP support):
cd ${BITCOIN_DIR}/src
make -f makefile.unix USE_UPNP= USE_IPV6=1 BDB_INCLUDE_PATH='/usr/include/db4.8'
strip bitcoind


Notes
-----
The release is built with GCC and then "strip bitcoind" to strip the debug
symbols, which reduces the executable size by about 90%.


miniupnpc
---------
tar -xzvf miniupnpc-1.6.tar.gz
cd miniupnpc-1.6
make
sudo su
make install


Berkeley DB
-----------
You need Berkeley DB 4.8.  If you have to build Berkeley DB yourself:
../dist/configure --enable-cxx
make


Boost
-----
If you need to build Boost yourself:
sudo su
./bootstrap.sh
./bjam install


Security
--------
To help make your bitcoin installation more secure by making certain attacks impossible to
exploit even if a vulnerability is found, you can take the following measures:

* Position Independent Executable
    Build position independent code to take advantage of Address Space Layout Randomization
    offered by some kernels. An attacker who is able to cause execution of code at an arbitrary
    memory location is thwarted if he doesn't know where anything useful is located.
    The stack and heap are randomly located by default but this allows the code section to be
    randomly located as well.

    On an Amd64 processor where a library was not compiled with -fPIC, this will cause an error
    such as: "relocation R_X86_64_32 against `......' can not be used when making a shared object;"

    To build with PIE, use:
    make -f makefile.unix ... -e PIE=1

    To test that you have built PIE executable, install scanelf, part of paxutils, and use:
    scanelf -e ./bitcoin

    The output should contain:
     TYPE
    ET_DYN

* Non-executable Stack
    If the stack is executable then trivial stack based buffer overflow exploits are possible if
    vulnerable buffers are found. By default, bitcoin should be built with a non-executable stack
    but if one of the libraries it uses asks for an executable stack or someone makes a mistake
    and uses a compiler extension which requires an executable stack, it will silently build an
    executable without the non-executable stack protection.

    To verify that the stack is non-executable after compiling use:
    scanelf -e ./bitcoin

    the output should contain:
    STK/REL/PTL
    RW- R-- RW-

    The STK RW- means that the stack is readable and writeable but not executable.


¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
doc/readme-qt.rst

Bitcoin-Qt: Qt4 GUI for Bitcoin
===============================

Build instructions
===================

Debian
-------

First, make sure that the required packages for Qt4 development of your
distribution are installed, these are

::

for Debian and Ubuntu  <= 11.10 :

::

    apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev \
        libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev \
        libssl-dev libdb4.8++-dev

for Ubuntu >= 12.04 (please read the 'Berkely DB version warning' below):

::

    apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev \
        libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev \
        libssl-dev libdb++-dev libminiupnpc-dev

then execute the following:

::

    qmake
    make

Alternatively, install `Qt Creator`_ and open the `bitcoin-qt.pro` file.

An executable named `bitcoin-qt` will be built.

.. _`Qt Creator`: http://qt-project.org/downloads/

Mac OS X
--------

- Download and install the `Qt Mac OS X SDK`_. It is recommended to also install Apple's Xcode with UNIX tools.

- Download and install either `MacPorts`_ or `HomeBrew`_.

- Execute the following commands in a terminal to get the dependencies using MacPorts:

::

    sudo port selfupdate
    sudo port install boost db48 miniupnpc

- Execute the following commands in a terminal to get the dependencies using HomeBrew:

::

    brew update
    brew install boost miniupnpc openssl berkeley-db4

- If using HomeBrew,  edit `bitcoin-qt.pro` to account for library location differences. There's a diff in `contrib/homebrew/bitcoin-qt-pro.patch` that shows what you need to change, or you can just patch by doing

        patch -p1 < contrib/homebrew/bitcoin.qt.pro.patch

- Open the bitcoin-qt.pro file in Qt Creator and build as normal (cmd-B)

.. _`Qt Mac OS X SDK`: http://qt-project.org/downloads/
.. _`MacPorts`: http://www.macports.org/install.php
.. _`HomeBrew`: http://mxcl.github.io/homebrew/


Build configuration options
============================

UPnP port forwarding
---------------------

To use UPnP for port forwarding behind a NAT router (recommended, as more connections overall allow for a faster and more stable bitcoin experience), pass the following argument to qmake:

::

    qmake "USE_UPNP=1"

(in **Qt Creator**, you can find the setting for additional qmake arguments under "Projects" -> "Build Settings" -> "Build Steps", then click "Details" next to **qmake**)

This requires miniupnpc for UPnP port mapping.  It can be downloaded from
http://miniupnp.tuxfamily.org/files/.  UPnP support is not compiled in by default.

Set USE_UPNP to a different value to control this:

+------------+--------------------------------------------------------------------------+
| USE_UPNP=- | no UPnP support, miniupnpc not required;                                 |
+------------+--------------------------------------------------------------------------+
| USE_UPNP=0 | (the default) built with UPnP, support turned off by default at runtime; |
+------------+--------------------------------------------------------------------------+
| USE_UPNP=1 | build with UPnP support turned on by default at runtime.                 |
+------------+--------------------------------------------------------------------------+

Notification support for recent (k)ubuntu versions
---------------------------------------------------

To see desktop notifications on (k)ubuntu versions starting from 10.04, enable usage of the
FreeDesktop notification interface through DBUS using the following qmake option:

::

    qmake "USE_DBUS=1"

Generation of QR codes
-----------------------

libqrencode may be used to generate QRCode images for payment requests.
It can be downloaded from http://fukuchi.org/works/qrencode/index.html.en, or installed via your package manager. Pass the USE_QRCODE
flag to qmake to control this:

+--------------+--------------------------------------------------------------------------+
| USE_QRCODE=0 | (the default) No QRCode support - libarcode not required                 |
+--------------+--------------------------------------------------------------------------+
| USE_QRCODE=1 | QRCode support enabled                                                   |
+--------------+--------------------------------------------------------------------------+


Berkely DB version warning
==========================

A warning for people using the *static binary* version of Bitcoin on a Linux/UNIX-ish system (tl;dr: **Berkely DB databases are not forward compatible**).

The static binary version of Bitcoin is linked against libdb4.8 (see also `this Debian issue`_).

Now the nasty thing is that databases from 5.X are not compatible with 4.X.

If the globally installed development package of Berkely DB installed on your system is 5.X, any source you
build yourself will be linked against that. The first time you run with a 5.X version the database will be upgraded,
and 4.X cannot open the new format. This means that you cannot go back to the old statically linked version without
significant hassle!

.. _`this Debian issue`: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=621425

Ubuntu 11.10 warning
====================

Ubuntu 11.10 has a package called 'qt-at-spi' installed by default.  At the time of writing, having that package
installed causes bitcoin-qt to crash intermittently.  The issue has been reported as `launchpad bug 857790`_, but
isn't yet fixed.

Until the bug is fixed, you can remove the qt-at-spi package to work around the problem, though this will presumably
disable screen reader functionality for Qt apps:

::

    sudo apt-get remove qt-at-spi

.. _`launchpad bug 857790`: https://bugs.launchpad.net/ubuntu/+source/qt-at-spi/+bug/857790

admin

±àÒë·½·¨
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª&#10148;&#10148;&#10148;&#10148;&#10148;&#10148;
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª&#10148;&#10148;&#10148;&#10148;&#10148;&#10148;
Linuxϵͳ &#10148;&#10148;&#10148;&#10148;&#10148;&#10148;

https://bitcointalk.org/index.ph ... g1079254#msg1079254
Õâ¸öÌû×Ó½²ÊöÁËÒ»¸öcentosϵͳϵıàÒë½Å±¾£º
https://github.com/weex/bitcoind-centos

http://www.firenzee.com/bitcoin-centos.sh
http://www.firenzee.com/bitcoin-centos-static.gz


¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª¡ª
Linuxϵͳ±àÒë·½·¨£º
http://bbs.73yi.net/thread-665-1-1.html
====================